Planet Technology VIP-2100 Manuel d'utilisateur télécharger pdf (Page 78)

VIP-2100 User’s manual - 73 -

Call Routing

The call routing can be used for hunting a PSTN trunk by prefix.

Start Path: Configuration→Routing Plan→Call Routing

Figure 7.9-3

Parameters:

• Group ID: Select the T1/E1 according to the selection of Hunting Group

ID when dialed number is matched

• Number To Route: The dialed telephone number to be matched

• Matched ANI Prefix: Calling party number used to filter

• Allow Use Others: To select other T1/E1 trunk when all trunk are busy

at your desired Hunting Group.

o Allowed: The call will use other T1/E1 trunks which is not belong to

the selected hunting group

o Forbad: The call will be disconnected immediately

Radius Setting

When you have an external RADIUS server to do the AAA

(Authorization, Authentication and Accounting), enter the correct parameter to

the Radius setting. It must be used in call flow to take effect.

Start Path: Configuration→Radius Setting

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 139 140

Pas de commentaire

Planet Technology VIP-2100 Manuel d'utilisateur Page 78