Planet-technology WDAP-2000PE Manuel d'utilisateur Page 41
- Page / 53
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
10. Ensure that your certificate authority is checked, then click Next.
11. Review the policy change information and click Finish.
12. Click Start - Run, type cmd and press enter.
Enter secedit /refreshpolicy machine_policy
This command may take a few minutes to take effect.
4.5.5 Internet Authentication Service (Radius) Setup
1. Select Start - Programs - Administrative Tools - Internet Authentication Service
2. Right-click on Clients, and select New Client.
3. Enter a name for the access point, click Next.
4. Enter the IP address of the WDAP-2000PE, and set the shared secret, as entered
on the Security Profile screen of the WDAP-2000PE.
5. Click Finish.
6. Right-click on Remote Access Policies, select New Remote Access Policy.
7. Assuming you are using EAP-TLS, name the policy eap-tls, and click Next.
8. Click Add...
If you don't want to set any restrictions and a condition is required, select Day-
And-Time-Restrictions, and click Add...
39
- 54/108Mbps Super A+G 1
- Wireless Access Point 1
- User’s Manual 1
- Copyright 2
- FCC Caution: 2
- Statement 2
- CE Mark Warning 3
- Revision 3
- TABLE OF CONTENTS 4
- Introduction 6
- 1.3 Physical Details 7
- 1.4 Specification 8
- 1.6 Wireless Performance 9
- Installation 10
- Setup & Management 11
- 3.3 Setup Wizard 12
- 3.3.3 Wireless Settings 13
- Select Common Secu 14
- 3.3.4 Save Config 15
- 3.4 Device Status 16
- 3.4.3 Bridge Table 17
- 3.4.4 Radio Table 18
- 3.4.5 Site Survey Table 18
- 3.5 Advanced Settings 19
- 3.5.3 SNMP Settings 21
- 3.5.4 MAC Filtering Settings 22
- 3.5.5 SSID Settings 23
- 3.5.6 Wireless Settings 25
- 3.5.7 Operational Mode 26
- 3.5.8 RADIUS Settings 27
- 3.5.9 DoS Settings 28
- Ping flooding filtering 29
- 3.6 System Tools 30
- 3.6.3 Factory Default 32
- 3.6.4 Reboot System 32
- PC and Server Configuration 33
- 4.4 Using WPA 34
- 4.5.2 Services Installation 35
- Encryption Settings 47
- Enabling Encryption 47
- 4.7 Using 802.1x Mode 49
- Troubleshooting 50
- Command Line Interface 51
- (2) Filtering Commands 52
- (3) SNMP Commands 52
- (4) Diagnostics Commands 53
- (5) Security Commands 53
Produits connexes et manuels pour Matériel Planet-technology WDAP-2000PE
(2 pages)Samsung HP-S5053 manuály
Uživatelské manuály a uživatelské příručky pro Televizory a monitory Samsung HP-S5053.
Poskytujeme 1 manuály pdf Samsung HP-S5053 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commentaires sur ces manuels