Planet-technology G.SHDSL.bis Bridge Router GRT-504 Manuel d'utilisateur télécharger pdf (Page 41)

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual

Set up the WAN1 VPI, VCI Encap. and Protocol

VPI: 0

VCI: 33

AAL5 Encap: LLC

Protocol: PPPoA + NAT or PPPoE + NAT

Click Next to setup User name and password.

For more understanding about NAT, review NAT/DMZ chapter.

If the Protocol using PPPoA+NAT or PPPoE+NAT, you must setup the ISP’s parameters on the

following:

Type the ISP1 parameters.

Username: test

Password: test

Password Confirm: test

Your ISP will provide the user name and password.

Idle Time: 10

You want your Internet connection to remain on at all time, enter “0” in the Idle Time field.

IP Type: Dynamics.

The default IP type is Dynamic. It means that ISP PPP server will provide IP information including

dynamic IP address when SHDSL.bis connection is established. On the other hand, you do not

need to type the IP address of WAN1. Some of the ISP will provide fixed IP address over PPP. For

fixed IP address:

IP Type: Fixed

IP Address: 192.168.1.1

Click Next.

Note: For safety, the password will be prompt as star symbol.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 151 152

Pas de commentaire

Planet-technology G.SHDSL.bis Bridge Router GRT-504 Manuel d'utilisateur Page 41