Planet-technology ISW-800M Manuel d'utilisateur télécharger pdf (Page 12)

OFF Disable port 6 Alarm

Enable port 6 Alarm. If the port’s link fails, the fault LED will

light up.

OFF Disable port 7 Alarm

Enable port 7 Alarm. If the port’s link fails, the fault LED will

light up.

OFF Disable port 8 Alarm

Enable port 8 Alarm. If the port’s link fails, the fault LED will

light up.

OFF Disable the ring master function.

Enable the switch as the ring master in the redundant ring

group.

[NOTE]

1. When port alarm function is enabled, the fault LED will on and Alarm relay will activity when port failure

occurs.

2. Please restart the switch after the Redundant ring DIPswitch is set.

2.1.6 Switch Bottom Panel

The bottom panel of the ISW-800M consists one terminal block connector within two DC power inputs

and one DC IN power jack for extra AC/DC power adapter.

Figure 2-2 shows the bottom panel of the switch

Figure 2-2 ISW-800M Bottom Panel.

2.1.7 Wiring the Power Inputs

Please follow below steps to insert the power wire.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 56 57

Pas de commentaire

Planet-technology ISW-800M Manuel d'utilisateur Page 12