Planet Technology VC-412 Manuel d'utilisateur télécharger pdf (Page 45)

VC-412 User’s Manual

can not be saved. Thus, you have to continue the following command to update

the VC-101S firmware.

Refer to the table below for speed versions

Speed VC-101S Version

P R2 (12.5/12.5)

Q R4 (18/16)

A LWD (4/1)

4. Now set the remote modem’s speed to A which is the LWD mode.

Command Description: RT <port>-<LWD speed mode>

Command: RT 2-A

Important: Setting the remote modem’s speed first is very important since connection

will end once the remote modem’s speed differs from the local switch.

5. Now set the speed of VC-412 back to LWD mode.

Command Description: LT<port>-<LWD speed mode>

Command: LT 2-A

Note: Connection will re-establish.

6. Save remote modem’s setting so it will not be lost upon power cycling.

Command Description: SR <port>

Command: SR 2

7. Adjust the VC-412 back to auto-speed mode.

Command Description: LR <port>-

Command: LR 2-

The figure below illustrates the commands to upgrade a version R4 VC-101S remotely

via VC-412 ICD command.

1 2 ... 40 41 42 43 44 45 46

Pas de commentaire

Planet Technology VC-412 Manuel d'utilisateur Page 45