Planet Technology FPS-1010G Manuel d'utilisateur télécharger pdf (Page 13)

Chapter2 Hardware Installation

1. Make sure the power is OFF, then connect printer to the Print Server's printer port.

2. Connect the LAN cable to the RJ-45 port of the Print Server.

3. Connect the other end of the LAN cable to a switch or your PC directly.

4. Connect the supplied Power Adapter.

5. Please make sure the LAN LED is light on.

NOTE1: The wireless interface of FPS-1010G is “Disabled” by default. If you want to

activate wireless interface, please refer to section 7.10 Wireless to know more information

for how to setup wireless interface.

NOTE2: MUST use the power adapter shipped with the print server, do NOT use any other

power adapter from any sources.

NOTE3: To prevent the compatibility problem between print server and a few printer, it is

recommended that you power on the print server before the printer.

NOTE4: Please be sure your printer is not a host-base printer. This kind of printer must be

connected to a PC directly, so they cannot work with Print Server. You may check

the printer specification or the GDI Printer List in our bundle CD to know this

printer can work with FPS-1010G or not.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 74 75

Pas de commentaire

Planet Technology FPS-1010G Manuel d'utilisateur Page 13