Planet Technology WAP5 Manuel d'utilisateur télécharger pdf (Page 25)

- 21 -

• Name: Assigns the WAP-5000 a unique name that allows the AP to be easily identified on the

network.

• SSID: The SSID is the name shared among all points in the wireless network. You can type an

existing domain name or create a new one that contains up to 32 characters.

• SSID Broadcasts: Click to enable or disable the SSID Broadcasts feature. If disabled, the

WAP-5000 would block any connection request from stations without the correct SSID and hide the

SSID in outgoing beacon frames. A site-survey tool will not find the SSID.

• User Isolation: Enable this option, any wireless client cannot detect another wireless client in the

same wireless network. It can give full privacy for clients under public access environment.

• Transmission Rate: Sets the transmission rate of the WAP-5000. In high-interference

environments a lower rate can increase overall transmission speed by reducing resends of lost

packets.

• Basic Rates: This value determines the basic rates used and reported for this BSS by the

WAP-5000. The highest rate specified is the rate that the WAP-5000 will use when transmitting

broadcast/multicast and management frames.

• Channel Number: You can change the channel used by the WAP-5000 from here. If the

Automatically option is selected, the WAP-5000 will choose an available radio channel

automatically.

• Aging Timer (seconds): The expiration time for wireless station without activity.

• Regulatory Domain: Identifies the Regulatory Domain where the WAP-5000 is used. Each

country has defined its available channel numbers and transmission power.

Encryption

Click the Encryption tab to set up the security settings of WAP-5000.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Pas de commentaire

Planet Technology WAP5 Manuel d'utilisateur Page 25