Planet-technology 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 Manuel d'utilisateur télécharger pdf (Page 30)

The following table describes the labels in this screen.

LABEL DESCRIPTION

Encapsulation Select your encapsulation type from the dropdown list.

Static IP Address Enter the static IP Address here.

IP Subnet Mask Enter the IP Subnet Mask here.

Gateway Enter the Gateway address here.

NAT Select whether NAT is Enabled or Disabled.

Default Route Select whether this PVC will be the default route for

Internet data.

Dynamic Route Select the RIP type and direction from the dropdown lists.

Multicast Select the multicast protocol you wish to use from the

dropdown list.

(3) PPPoA / PPPoE

Select this option if your ISP requires you to use a PPPoE connection. This option is

typically used for DSL service. Select Dynamic PPPoE to obtain an IP address

automatically for your PPPoE connection. Selection Static PPPoE to use static IP

address for your PPPoE connection. Please enter the information accordingly.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 62 63

Pas de commentaire

Planet-technology 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 Manuel d'utilisateur Page 30