Planet-technology 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 Manuel d'utilisateur télécharger pdf (Page 34)



3.7.1.1 Router Local IP

IP Address: Enter the IP address of your ADSL router in dotted decimal notation, for

example, 192.168.1.1 (default setting).

IP Subnet Mask: Your ADSL router will automatically calculate the subnet mask

based on the IP address that you assign. Unless you are implementing sub netting, use

the subnet mask computed by the ADSL router.

Dynamic Route: Select the Dynamic Route from RIP1, RIP2-B, and RIP2-M. Please

refer to

Dynamic Routing. The only difference is the interface.



3.7.1.2 DHCP Server

The DHCP Server gives out IP addresses when a device is booting up and request an IP

to be logged on to the network. It must be set as a DHCP client to obtain the IP address

automatically. By default, the DHCP Server is enabled. The DHCP address pool

contains the range of the IP address that will automatically be assigned to the client on

the network.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 62 63

Pas de commentaire

Planet-technology 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 Manuel d'utilisateur Page 34